CEVISA-BEVELLING-MACHINE-CHP-12-INV

Cevisa Bevelling Machine CHP 12INV

Highest Profitability & Productivity

More flexible and more productive than ever! (Suited for upside-down bevels)

The CHP 12 INV can bevel in an upside-down position effortlessly in a complete self-feed mode.

As its emblematic model the CHP 12, the beveller CHP 12 INV is the perfect solution to bevel large diameter tubes as well as tank heads, thanks to its breathing valves.

Its bevelling speed makes this machine the most high performance and flexible bevelling system of all the CHP 12 range for large plates and diameter tube bevelling, simplifying production processes as much as possible and reducing production time.

Contact Us Here For More Information!
PDF Brochure

Cevisa Bevelling Machine CHP 12INV Demonstration

Benefits of the standard shearing cutting bevelling machine CHP 12INV

  • Flexible: breathing valve to change position easily.

  • High profitability: high speed self-feed bevel -2,6 m/min.

  • Constant and uniform bevel depth + high bevel capacity up to 17 mm bevel.

  • Dry cut: no need to prepare plates and tubes to bevel.

Additional Information

Performances

  • Maximum bevel in one run: 6 mm*
  • Maximum bevel recommended in several runs: 10mm*
  • Maximum recommended thickness: plates and tubes up to 8 mm.
  • Nominal thickness : plates and tubes from 3 mm to 16 mm.
  • Double bevel with 2 machines working in parallel: CHP 12 + CHP12 INV.
  • Plate bevelling: width min. 55 mm (for smaller width, please consult).
  • Tube bevelling: Ø min. int.100 mm.
  • Disc bevelling: Ø min. 350 mm.

* Dimensions calculated on 400 Mpa steel, bevel length.

Bevel blueprint

  • Plate bevelling: K, V, X and Y bevels
  • Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube(depending on diameters).
  • Bevel speed: 1.6 m/ min.

Specifications

  • Motor: three-phase
  • Motor power: 0.75 CV – 0.55 kW

Voltage:

  • 220/380 V. 50 Hz
  • 250/440 V. 60 Hz
  • For other voltages, please consult us.

Electric box with

  • Thermomagnetic switch trip
  • Emergency stop button

Weights

  • Net weight: 45 Kg
  • Works height: adjustable

Switch

Reversing switch / Switcher

Cevisa’s beveling machine is provided with:

  • 3 cutters for mild steel (1 on machine)
  • 1 angle variation device – 30°
  • 1 device to bevel tubes
  • 1 set of spanners

Extras & consumables:

  • Cutters for mild steel
  • Cutters for stainless steel
  • Cutters for aluminum
  • Angle variation devices: 22.5 – 25º – 30º – 35º – 37.5º – 45º
    (For others angle, please enquire)
  • Plastic rollers to avoid material marking
  • Spare part for small width plates: min. plates width 20 – 25 – 32 and 40 mm
CEVISA Catalogue

CEVISA Catalogue

Cevisa Bevelling Machines

Contact Us Here For More Information!
Esco Ground Millhog Series

Cevisa Bevelling Machines CHP7

Maximum bevel in one run: 6 mm
Esco Ground Millhog Series

Cevisa Plate and Tube Beveller CHP 12

Maximum bevel in one run: 12 mm
Esco Ground Millhog Series

Bevelling Machine CHP 12 G

Maximum bevel in one run: 12 mm
Esco Ground Millhog Series

Bevelling Machine CHP 21 G

Maximum bevel in one run: 20 mm
Esco Ground Millhog Series

Bevelling Machine CHP 21 G INV

Maximum bevel in one run: 20 mm
Esco Ground Millhog Series

Cevisa Bevelling Machine CHP12 G REV

Maximum bevel in one run: 12 mm
Esco Ground Millhog Series

Cevisa Bevelling Machine CHP 21 G REV

Maximum bevel in one run: 20 mm
Esco Ground Millhog Series

Cevisa Bevelling Machine CHP 60 G

Capability in one run: 28 mm bevel length