Mactech Europe can demonstrate over 20 years experience in the provision of all types of machining in-situ support services and are uniquely positioned to complete difficult projects in the most demanding environments.

Mactech Europe can draw on the technically qualified manpower which is readily available, supported with extensive equipment resources to provide a quality, cost effective range of onsite machining services that achieve desired results within acceptably time frames.


In-situ Pipe Cutting & Pipe Preparation

Mactech Europe Ltd pipe cutting, and end prepping equipment is amongst the best machines of their kind available today.

With its lightweight and rigid construction, it can be used in almost any environment, even subsea.

Clamshell Lathes Machines are supplied to offshore installations, pipe processing yards, shipbuilders, pressure vessel manufacturers and structural and mechanical contractors to name but a few.

Mactech has the capability to cut pipes of any diameter and wall thickness thanks to our wide range of OD mounted clamshell pipe cutting machines and our internally mounted end prep machines.

We can machine a broad spectrum of materials such as but not limited to; cast iron, carbon steel and stainless steel, including Super Duplex.

Our service technicians are well versed in applications such as weld excavating to remove defective weld material, match boring to enable pipes with dissimilar wall thicknesses to be welded together, generating weld preparations in the standard 30 degrees, 37 degrees profiles along with compound or ‘J’ bevels and anything else in between.

When you require on-site pipe cutting and pipe end preparation services you need a company you can depend on, with quality equipment and knowledgeable technicians.

Mactech Pipe Cutting Services have the necessary manpower and equipment resources available to provide a quality, cost-effective service for the benefit of its customers, with the ability to respond at a moment’s notice.

We can provide on-site pipe cutting services globally.

Our pipe cutting machines are manufactured and maintained to the highest standards, ensuring that they will perform to the highest tolerances under virtually all conditions.

We provide our pipe cutting services to the following major industry sectors:

  • Petrochemical
  • Papermaking
  • Power Generation
  • Shipbuilding
  • Offshore
  • Oil & Gas
  • Subsea
  • General Engineering and Fabrication
Need Help Have a Project – Contact Us!

LC CLamshell Lathes | From 2 to 16 inch

Mactech Europe On-Site Clamshell Cutting Machines
Mactech Europe On-Site Clamshell Cutting Machines
Mactech Europe On-Site Clamshell Cutting Machines