Mactech Europe PBM Machine

Mactech PBM24

PBM-24 Clamping Range 215 – 620mm (8″ – 24″)

Thanks to the stability of the machines, every end preparation is identical.

The PBM-24 machine is the largest in the series of PBM machines.

The PBM-24 is supplied as standard with an electrically operated feed and electrically operated clamping.

The insert holders which are available with this machine are produced with hard metal inserts with a cutting length of 45mm.

Thanks to the robust construction of the machine, a feed rate of 0.4mm per revolution is no problem (and this with a cutting length of 45mm).

Producing end preparations is done in seconds

Output is an important factor in the choice of a machine. In the case of the PBM machines this is a factor which can be established easily.

Contact Us Here For More Information!

Additional Information

The control panel is provided with the following functions:

  • Start Machine
  • Stop Machine
  • Cooling pump on/off
  • Pulse Action Tool Head
  • Rapid Action Feed Left
  • Rapid Action Feed Right
  • Start Feed
  • Feed Rate Regulator
  • Protection Cover open/closed (pneumatic)

Electrically Operated Prism Clamping

The PBM-24 machine is provided with an electrically operated prism clamp with adjustable clamping pressure. Pressing the knob causes the clamp to open and close. The operating panel is located on the side of the clamp. There is an indicator lamp on the control panel which lights up when the pipe is clamped at the maximum adjusted clamping pressure.

Infinitely Adjustable Feed

The standard electrically operated feed is infinitely adjustable by means of a rotary knob. This knob is located on the control panel. The feed can thus be regulated very easily and efficiently.

Tool Set for the PBM-24 Machine

A special tool set has been developed for the PBM-24 machine. This tool set consists of 2 double insert holders and 2 single insert holders.

This set is adjusted once and it is then possible, without further adjustment of the insert holders, to machine all sizes of pipe within the range of the machine.

The tool set is likewise suitable for machining (in one operation) the maximum wall thickness of 45 mm.

Clamping range * 215 – 620 mm. (8″ – 24″)
Turning range * 170 – 620 mm.
Motor **** 380V. – 3 ph. – 4,5 / 5,5 kW
Clamping ** Prism clamp – electr. operated
Machining by hard metal inserts.
Max. wall thickness *** 45 mm ( in 1 operation )
Feed ** Electrically operated.
Feed travel 100 mm
Speed range 25, 38 and 50 r.p.m.
Measurement 2000 x 2500 x 1800 mm.
Weight 11000 kg.
Coolant pump built in
Clamping range * 80 – 410 mm. (3″ – 16″) **
Turning range * 60 – 410 mm.
Motor **** 380V. – 3 ph. – 4,5 / 5,5 kW
Clamping ** Prism clamp – manual.
Machining by hard metal inserts.
Max. wall thickness *** 20 mm ( in 1 operation )
Feed ** manual.
Feed travel 100 mm
Speed range 36, 48, 72 and 96 rev./min.
Measurement 1400 x 1100 x 1800 mm.
Weight 2250 kg.
Coolant pump built in


Please Note:

* The clamping and turning range can if necessary be reduced by means of special insert jaws (optional).

** Further options are automatic clamping, automatic feed and so-called mist cooling system.

*** By processing the pipe several times, the wall thickness becomes unlimited.

**** Other voltages on demand.

Esco Ground Millhog Series

Mactech Europe PBM Machine 6

46mm – 180mm
(1.5″ – 6″)
Esco Ground Millhog Series

Mactech Europe PBM Machine 16

80mm – 410mm
(3″ – 16″)
Esco Ground Millhog Series

Mactech Europe PBM Machine

Accessories