Pop-A-Plug® Manual Installation Tools

POP-A-PLUG®-MANUAL-INSTALLATION-TOOLS
Pop-A-Plug® Manual Installation Tools – PDF

EST’s Pop-A-Plug® Manual Installation Tool (MIT) is the perfect companion to our Pop-A-Plug 6600 Hydraulic Ram or our CQR Close Quarter Ram, providing fast, reliable installation where no air or electricity are available.

Each MIT comes complete with Pull Rod and Positioner to install the size and style Pop-A-Plug identified in the tool’s model number.

The same MIT body will accept all pull rods and positioners for P2’s up to 1.160″ and Pop-A-Plug® Air-Cooled Heat Exchanger Tube Plugging System plugs up to 1.149″.

The MIT can be used with manual wrenches or sockets, as well as with electric or pneumatic impact wrenches.

To use, first connect the reusable hex pull rod to the installation tool. The force needed to expand and install the Pop-A-Plug is created by tightening the hex compression nut.

The locating pin acts as a reaction arm, preventing the body from spinning.

Operational Benefits

  • Manually Installs Plugs Quickly and Easily
  • Works on All Styles of Pop-A-Plugs®
Product Information Request Form
OR
Contact Us For More information?

Each MIT comes complete with Pull Rod and Positioner to install the size and style Pop-A-Plug identified in the tool’s model number.

The same MIT body will accept all pull rods and positioners for P2’s up to 1.160″ and Pop-A-Plug® Air-Cooled Heat Exchanger Tube Plugging System plugs up to 1.149″.

The MIT can be used with manual wrenches or sockets, as well as with electric or pneumatic impact wrenches.

  • Connect the reusable hex pull rod to the installation tool.
  • Apply the force necessary to expand and install the Pop-A-Plug by tightening the hex nut.
  • The locating pin acts as a reaction arms to prevent the body from spinning as you tighten the hex nut.

Pop-A-Plug® Manual Installation Tools

Pop-A-Plug® Manual Installation Tools
Don’t Compromise Onsite Safety
Contact Us Here!
Esco Ground Millhog Series

Pop-A-Plug® CPI/Perma
Medium Pressure

Repair Leaking or Degraded Heat Exchanger and Condenser Tubes

Esco Ground Millhog Series

Pop-A-Plug®
P2 High
Pressure

Permanently Seal Leaking Heat Exchanger Tubes Without Welding Or Explosives

Esco Ground Millhog Series

Pop-A-Plug® Boiler Tube
Plugs

Make Boiler Repairs Faster & Easier – Reduce Downtime, Eliminate Welding, Save Money

Esco Ground Millhog Series

Pop-A-Plug® Tube
Stabilizers

Effectively Stabilizes Weakened Or Fractured Heat
Exchanger Tubes

Esco Ground Millhog Series

G-160 Tube Testing Tool

Locate Pinhole Leaks with a Safe & Reliable Leak Detector

VACUUM-TUBE-TESTING-GUN-G-250

Vacuum Tube Testing Gun G-250

Quickly seal off and evacuate individual heat exchanger tubes to test the tube for leakage

VACUUM-TUBE-TESTING-GUN-G-250

G-650 Vacuum Joint Testing Gun

Quickly Seal Off And Evacuate Individual Heat Exchanger Tubes To Test The Tube For Leakage

VACUUM-TUBE-TESTING-GUN-G-250

Pop-A-Plug® System Ram Packages

Installs Pop-A-Plug® Tube Plugs Quickly, Safely and Easily

VACUUM-TUBE-TESTING-GUN-G-250

Pop-A-Plug® Removal Tool

For Fast, Reliable Removals – No Air Or Electricity Needed

VACUUM-TUBE-TESTING-GUN-G-250

Hydra-Loc® Tube Sleeving

Repairing Tubes… For A Fraction Of The Cost Of Retubing

VACUUM-TUBE-TESTING-GUN-G-250

Pop-A-Plug® Air-Cooled Heat Exchanger Tube Plugging System Fin Fan Coolers

VACUUM-TUBE-TESTING-GUN-G-250

Condenser Plug Change Out

It’s Time To Change Out Your Old Rubber Condenser Plugs To Pop-A-Plugs®! Minimize Plant Downtime!