Esco-Terminator-Millhog-Series

Esco-Terminator-Millhog-Series

Esco-Wart-Millhog-Series-Hydraulic

Esco-Wart-Millhog-Series-Hydraulic

Esco Terminator Millhog Series

The Terminator MILLHOG is a ruggedly constructed precision pipe beveling machine for performing weld joint bevels at any angle on pipe ends up to 36″.

Built with state of the art materials that are precision machined, heat treated and hardened, the Terminator is designed to provide years of trouble free service on the toughest applications.

The included Safety Spring Hanger permits the Terminator to be safely and easily aligned and secured square to the pipe.

Esco Terminator Millhog PDF
UK Only Instant Quote?
OR
Need more information?

Esco Terminator Millhog Features

  • Rigidly clamps to pipe up to 36″
  • Pneumatic or hydraulic motor options
  • 8 sets of clamp ribs/pads and 2 wedges cover entire range
  • Formed tool bits can be used for wall thickness up to 2.5″
  • Preps all alloys
  • Bevel, face and bore simultaneously
  • Simple to operate
  • Patented safety chain and dual spring hanger makes tool alignment easy and safe
  • Adjustable tool posts with preset angles

Images

Esco-Terminator-Millhog-Series1
Esco-Terminator-Millhog-Series1
Esco-Terminator-Millhog-Series1

Available Kits

TERMINATOR MILLHOG BASIC KIT #: T-1000

I.D. 8.625″ – 26.750″
I.D. 219.1mm – 679.5mm

(1) Motor and tool base assembly (specify motor)
(1) Feed mechanism
(1) Small wedge
(1) Draw rod and small actuator
(5) Clamp Rib/Pad sets T-01 – T-05
(1) Clamp pad extension T-219
(2) Tool post base assembly
(1) Flat tool post
(1) Spring hanger
(2) Legs
(1) Shipping & storage container
(1) Operating and maintenance inst.

Note:

Pneumatic motor options add:
(1) 3/4″ hose w/ filter, oiler & 1/2″ coupler

TERMINATOR MILLHOG STANDARD KIT #: T-2000
I.D. 14.75″ – 36.5″
I.D. 374.7mm – 914.4mm

(1) Motor and tool base assembly (specify motor)
(1) Feed mechanism
(1) Large wedge
(1) Draw rod and large actuator
(5) Clamp Rib/Pad sets T-01 – T-05
(1) Clamp pad extension T-219
(2) Tool post base assembly
(1) Flat tool post
(1) Spring hanger
(2) Legs
(1) Shipping and storage container
(1) Operating and maintenance inst.

Note:
Pneumatic motor options add:
(1) 3/4″ hose w/ filter, oiler & 1/2″ coupler

TERMINATOR MILLHOG COMPLETE KIT #: T-3000
I.D. 8.625″ – 36.5″
I.D. 219.1mm – 914.4mm

(1) Motor and tool base assembly (specify motor)
(1) Feed mechanism
(1) Large wedge
(1) Small wedge
(1) Draw rod and large actuator
(1) Draw rod and small actuator
(5) Clamp Rib/Pad sets T-01 – T-05
(2) Clamp pad extension T-219 & T-374
(2) Tool post base assembly
(1) Flat tool post
(1) Spring hanger
(2) Legs
(1) Shipping & storage container
(1) Operating and maintenance inst.

Note:
Pneumatic motor options add:
(1) 3/4″ hose w/ filter, oiler & 1/2″ coupler

Rental tool kits are setup and packaged to meet your specific job/application.

This makes it so your tool is ready to go and only has parts necessary for your job, avoiding confusion and minimizing shipping costs.

Specifications

Working Range   8.75″ I.D. – 36.0″ O.D.  
Blade Series   M-Series Blades  
Min. Width   30″  
Head Length   50″  
  Pneumatic   Hydraulic
  5 hp   5 hp
  90 psi   1500 psi
  95 cfm   8-12 gpm
Cutterhead Speed 4 rpm   1 – 4 rpm
Cutterhead Speed (gear box) 2 rpm   1 – 2 rpm
Working Weight 700 lbs   704 lbs
Shipping Weight 1375 lbs   1379 lbs
Shipping Dimensions 36″ x 54″ x 48″   36″ x 54″ x 48″
Working Range   222.25mm I.D. – 914.4mm O.D.  
Blade Series   M-Series Blades  
Min. Width   762mm  
Length   1270mm  
  Pneumatic   Hydraulic
  3728 W   3728 W
  6.2 bar   102 bar
  2690 Lt/min   30.3-45.4 L/min
Cutterhead Speed 4 rpm   1 – 4 rpm
Cutterhead Speed (gear box) 2 rpm   1 – 2rpm
Working Weight 318 kgs   319.1 kgs
Shipping Weight 623.7 kgs   625.3 kgs
Shipping Dimensions 915mm x 1372mm x 1219mm   915mm x 1372mm x 1219mm

Accessories

TOOL POST PART #: SEE CHART

The Terminator MILLHOG kits are sold with 2 tool post bases and 1 straight tool post so that another tool post can be selected. In addition to a flat tool post, there are also angled tool posts that are most commonly used on heavy wall pipe (in excess of 2.0″/ 50.8mm) with a straight blade for rigidity. All tool posts ride on the tool post bases and are secured after final adjustments with 2 locks on either side of the base.

Includes  

(1) Tool post (see chart for sizes)

(4) Clamp plate screw

(2) Clamp plate

  • TOOL POST PART #: SEE CHART The Terminator MILLHOG kits are sold with 2 tool post bases and 1 straight tool post so that another tool post can be selected. In addition to a flat tool post, there are also angled tool posts that are most commonly used on heavy wall pipe (in excess of 2.0"/ 50.8mm) with a straight blade for rigidity. All tool posts ride on the tool post bases and are secured after final adjustments with 2 locks on either side of the base. Includes (1) Tool post (see chart for sizes) (4) Clamp plate screw (2) Clamp plate
  • TOOL POST PART #: SEE CHART The Terminator MILLHOG kits are sold with 2 tool post bases and 1 straight tool post so that another tool post can be selected. In addition to a flat tool post, there are also angled tool posts that are most commonly used on heavy wall pipe (in excess of 2.0"/ 50.8mm) with a straight blade for rigidity. All tool posts ride on the tool post bases and are secured after final adjustments with 2 locks on either side of the base. Includes (1) Tool post (see chart for sizes) (4) Clamp plate screw (2) Clamp plate
  • TOOL POST PART #: SEE CHART The Terminator MILLHOG kits are sold with 2 tool post bases and 1 straight tool post so that another tool post can be selected. In addition to a flat tool post, there are also angled tool posts that are most commonly used on heavy wall pipe (in excess of 2.0"/ 50.8mm) with a straight blade for rigidity. All tool posts ride on the tool post bases and are secured after final adjustments with 2 locks on either side of the base. Includes (1) Tool post (see chart for sizes) (4) Clamp plate screw (2) Clamp plate

Options Chart

Tool Post # Tool Post Angle Tool Post Base
T-71 0 T-36
T-72 10 T-36
T-73 20 T-36
T-74 30 T-36
T-75 37.5 T-46

I.D. TRACKING ATTACHMENT PART #: T-100
The I.D. Tracking Attachment for the Terminator MILLHOG is used for pipe that is out-of-round or has varying wall thickness. This attachment rides along the inside diameter and moves in/out as the cutterhead rotates, leaveing a consistent bevel, despite the pipes imperfect shape.

Includes
(1) I.D. tracking assembly
(2) Clamp plate
(6) Clamp plate screws
(1) Extended tool post base
(4) Tool post base screw

  • Esco-Terminator-Millhog-Series
  • Esco-Terminator-Millhog-Series
  • Esco-Terminator-Millhog-Series
  • Esco-Terminator-Millhog-Series

TORQUE MULTIPLIER GEAR BOX PART #: T-101

The Torque Multiplier Gear Box for the Terminator MILLHOG is designed to be easily installed with all motor options. When the Gear Box is attached, the cutterhead rpm is cut in half while torque is doubled, making it ideal for larger tube and pipe or tube and pipe with heavy wall thickness.

Includes          

(1) Gear box assembly

(1) Motor key

(4) Mounting Screws

  • Esco-Terminator-Millhog
  • Esco-Terminator-Millhog

Resources

Wedge Clamp Rib Set I.D. Range (in) I.D. Range (mm)
  T-01 8.625 – 10.750 219.1 – 273.1
  T-01 & T-02 10.500 – 120750 266.7 – 323.9
  T-01 & T-03 12.500 – 14.750 317.5 – 374.7
  T-01 & T-04 14.500 – 16.750 368.3 – 425.5
Small Wedge T-01 & T-05 16.500 – 18.750 419.1 – 476.3
  T-01 & T-219 Ext. & T-02 18.500 – 20.750 469.9 – 527.1
  T-01 & T-219 Ext. & T-03 20.500 – 22.750 520.7 – 577.9
  T-01 & T-219 Ext. & T-04 22.500 – 24.750 571.5 – 628.7
  T-01 & T-219 Ext. & T-05 24.500 – 26.750 622.3 – 679.5
  T-01 14.750 – 16.250 374.7 – 412.8
  T-01 & T-02 16.000 – 18.500 406.4 – 469.9
  T-01 & T-03 18.000 – 20.500 457.2 – 520.7
  T-01 & T-04 20.000 – 22.500 508.0 – 571.5
  T-01 & T-05 22.000 – 24.500 558.8 – 622.3
Large Wedge T-01 & T-06 24.000 – 26.500 609.6 – 673.1
  T-01 & T-374 Ext. & T-02 26.000 – 28.500 660.4 – 723.9
  T-01 & T-374 Ext. & T-03 28.000 – 30.500 711.2 – 774.7
  T-01 & T-374 Ext. & T-04 30.000 – 32.500 762.0 – 825.5
  T-01 & T-374 Ext. & T-05 32.000 – 34.500 812.8 – 876.3
  T-01 & T-374 Ext. & T-06 34.000 – 36.500 863.6 – 927.1
PDF Brochure
M-Series Blades

Esco Tube & Pipe Beveling Tools

UK Only Instant Quote?
OR
Need more information?
Esco Ground Millhog Series

Ground Millhog Series

0.5″ ID. – 2.25″ OD. 12.7MM ID. – 57.2MM OD.
Esco Ground Millhog Series

Mongoose Millhog Series

0.625″ I.D. – 3.0″ O.D. 15.9MM I.D. – 76.2MM O.D.
Tube Weasel Millhog Series

Tube Weasel Millhog Series

0.75″ ID. – 3.0″ OD. 19.1MM ID. – 76.2MM OD.
C-Hog Millhog Series

C-Hog Millhog Series

0.5″ OD. – 3.0″ OD. 12.7MM OD. – 76.2MM OD.
Wart Millhog Series

Wart Millhog
Series

0.75″ ID. – 4.5″ OD. 19.1MM ID.–114.3MM OD.
Fin-Millhog-Series

Fin Millhog
Series

1.25″ ID. – 2.5″ OD. 31.8MM ID. – 63.5MM OD.
Mini-Millhog-Series

Mini Millhog
Series

1.25″ I.D. – 6.625″ O.D. 31.8MM ID–168.3MM OD
Prepzilla-Millhog-Series

Prepzilla Millhog Series

1.575″ I.D. – 8.625″ O.D. 40.0MM ID– 219.1MM OD
Commander-Millhog-Series

Commander Millhog Series

3.75″ I.D. – 14.0″ O.D. 95.3MM ID–355.6MM OD
Dictator Millhog Series

Dictator Millhog Series

4.5″ I.D. – 18.0″ O.D. 114.3MM ID–457.2MM OD
Dictator 11 Millhog Series

Dictator II Millhog Series

4.5″ I.D. – 24.0″ O.D. 114.3MM ID–609.6MM OD