Menu
HOG110
Manually operated|Fast Setup|Sturdy storage
The FLANGE HOG 110 is rugged, compact and ideal for quickly reconditioning rusty, scarred or worn flange gasket seats to like-new condition in minutes.
This easy to operate flange facing tool is perfect for re-facing raised-face and flat-faced flanges on site or in a fabrication/repair shop.
The ESCO proprietary clamping system is simple to configure and designed for fast set-up with accurate alignment.
The ESCO proprietary clamping system is simple to configure and designed for fast set up with accurate alignment.
Cutting bits are double sided, long-lasting, and specially formed to cut through a wide variety of material including carbon steel, stainless steel, alloyed steel, aluminum and cast iron.
Each tool kit comes ready to use in a sturdy carrying case that keeps everything conveniently organized and readily accessible.
Our Flange Hog 110 Kit comes complete with: FL-110, (1) Housing, gear drive, feed assy (stock finish), (1) Small wedge with Draw Rod and Actuator, (1) Large wedge with Draw Rod and Actuator, (1) Insert Holder, straight, (1) Insert Holder, double pocket, (10) Insert, 1/4″, (4) Insert screw, (6) Spring, 12″ long, (6) Spring, (3) Clamp rib sets G-04 – G-06, (8) Clamp Rib sets H-01 – H-08, (1) Tool Post assembly, (1) Dial Indicator – Mag back, (1) Carrying case, (1) Operating and maintenance inst.
Rental tool kits are setup and packaged to meet your specific job/application.
This makes it so your tool is ready to go and only has parts necessary for your job, avoiding confusion and minimizing shipping costs.
SMOOTH FEED PART #: FL-27 & FL-29, The Flange Hog 110 comes standard with a stock-finish feed shaft and nut but can be switched out for a smooth-finish feed. This smooth-finish will still appear to show machining marks but will face an average roughness of 125 – 250 μin / 3.2 – 6.3 μm., Includes, (1) Smooth Shaft, (1) Smooth Nut, Esco-Flange-Hog-110-Smooth-Shaft, Esco-Flange-Hog-110-Smooth-Shaft
Application Range
Working Range .9″ I.D. – 14″ O.D./ 22.9mm I.D. – 355.6mm O.D.Stock Finish 250 – 500 μin/ 6.3 – 12.5 μmSmooth Finish (Optional) 125 – 250 μin /3.2 – 6.3 μmDrive Type Manual/ ManualHousing Width 5.3″ /134.6mmHousing Length 9.4″/ 238.8mmWorking Weight 15.4 lbs/ 7kgShipping Weight 42 lbs /19.1 kgShipping Dimensions 20.5″ x 9″ x 17″/ 521mm x 229mm x 432mm
Clamp Rib Chart
Wedge/ Clamp Rib Set/ I.D. Range (in) /I.D. Range (mm) No Wedge/G-04 /0.90 – 1.09/ /22.73 – 27.79 /G-05 /1.02 – 1.22 /25.78 – 30.89 /G-06 /1.12 – 1.34 /28.91 – 34.01Small Wedge/ H-01/ 1.32 – 1.63/ 33.40 – 41.38 /H-02 /1.52 – 1.94 /38.63 – 49.28 /H-03 /1.83 – 2.26 /46.43 – 57.30 /H-04 /2.15 – 2.58 /54.56 – 65.41 /H-02 & H-05 /2.46 – 2.88 /62.59 – 73.23 /H-03 & H-05 /2.78 – 3.20 /70.51 – 81.26 /H-04 & h-05 /3.09 – 3.51 /78.51 – 89.33 /H-02 & H-08 /3.41 – 3.83 /86.49 – 97.36 /H-03 & H-08 /3.72 – 4.15 /94.59 – 105.59 /H-04 & H-08 /4.04 – 4.47 /102.72 – 113.64 /H-02 & H-06 /4.36 – 4.80 /110.85 – 121.82 /H-03 & H-06 /4.69 – 5.12 /119.02 – 130.00 /H-04 & H-06 /5.01 – 5.44 /127.20 – 138.20Large Wedge /H-01 /5.30 – 5.57 /134.62 – 141.58 /H-02 /5.40 – 5.90 /137.84 – 149.76 /H-03 /5.72 – 6.22 /145.34 – 158.01 /H-04 /6.05 – 6.55 /153.59 – 166.27 /H-02 & H-05 /6.33 – 6.83 /160.76 – 173.38 /H-03 & H-05 /6.65 – 7.15 /168.96 – 181.84 /H-04 & h-05 /6.98 – 7.48 /177.19 – 189.87 /H-02 & H-08 /7.30 – 7.80 /185.37 – 198.01 /H-03 & H-08 /7.62 – 8.12 /193.60 – 206.27 /H-04 & H-08 /7.95 – 8.45 /201.83 – 214.53 /H-02 & H-06 /8.27 – 8.77 /210.06 – 222.73 /H-03 & H-06 /8.60 – 9.09 /218.31 – 230.99 /H-04 & H-06 /8.92 – 9.42 /226.57 – 239.24 /H-02 & H-07 /9.24 – 9.74 /234.75 – 247.42 /H-03 & H-07 /9.57 – 10.07 /243.00 – 255.70 /H-04 & H-07 /9.89 – 10.39 /251.26 – 263.93
Inserts
FL05 2 Sided Insert
Join our newsletter for the latest industry insights
English (UK) 
Deutsch 
Nederlands 
Español 
Français