Menu
MIT
Pull Rod|Manual wrenches|Relaible Installation
EST’s Pop-A-Plug® Manual Installation Tool (MIT) is the perfect companion to our Pop-A-Plug 6600 Hydraulic Ram or our CQR Close Quarter Ram, providing fast, a reliable installation where no air or electricity are available.
Each MIT comes complete with Pull Rod and Positioner to install the size and style Pop-A-Plug identified in the tool’s model number.
The same MIT body will accept all pull rods and positioners for P2’s up to 1.160″ and Pop-A-Plug® Air-Cooled Heat Exchanger Tube Plugging System plugs up to 1.149″.
The MIT can be used with manual wrenches or sockets, as well as with electric or pneumatic impact wrenches.
To use, first connect the reusable hex pull rod to the installation tool.
The force needed to expand and install the Pop-A-Plug is created by tightening the hex compression nut.
The locating pin acts as a reaction arm, preventing the body from spinning.
Application Range
Each MIT comes complete with Pull Rod and Positioner to install the size and style Pop-A-Plug identified in the tool’s model number., The same MIT body will accept all pull rods and positioners for P2’s up to 1.160″ and Pop-A-Plug® Air-Cooled Heat Exchanger Tube Plugging System plugs up to 1.149″., The MIT can be used with manual wrenches or sockets, as well as with electric or pneumatic impact wrenches.
Connect the reusable hex pull rod to the installation tool., Apply the force necessary to expand and install the Pop-A-Plug by tightening the hex nut., The locating pin acts as a reaction arms to prevent the body from spinning as you tighten the hex nut.
Join our newsletter for the latest industry insights
English (UK) 
Deutsch 
Nederlands 
Español 
Français