EGM
Narrow body|Pneumatic|Electric & battery
The Ground MILLHOG is a right angle, I.D. clamping beveling machine that is only 1.5in (38.1mm) wide and fits between boiler water wall tubes for beveling a single tube and other boiler tube applications with restricted access.
The Ground MILLHOG is made of high quality treated materials for durability. Proprietary bearings support heavy duty gears for smooth operation on the toughest applications. Patented push-pull clamp and release system with permanently attached wrenches eliminate the possibility of loose parts separating from the tool.
This high performance machine utilizes the EscoLock wedge style blade lock system and TiN coated blades for chatter-free beveling.
GROUND MILLHOG BASIC KIT #: G-200, (1) Motor and gear drive assembly (specify motor),(1) Mandrel 0.625″ (15.9mm),(1) Draw Rod Assembly,(1) Cutterhead (see cutterhead chart for options),(1) Clamp rib set choice of (G-02A – G-13) (specify),(1) Carrying case,(1) Operating and maintenance inst.,Note:, Pneumatic motor options add:, (1) 1/2″ hose w/ filter oiler & 3/8″ coupler, Battery motor options add:, (2) 5.2ah Li-Ion batteries, (1) Charger
GROUND MILLHOG COMPLETE KIT #: G-300, (1) Motor and gear drive assembly (specify motor), (1) Feed mechanism, (1) Mandrel 0.625” (15.9mm), (1) Draw Rod Assembly, (1) Cutterhead 1.5″ (38.1 mm), (1) Cutterhead 2.25″ (57.2 mm), (12) Clamp rib set (G-02A – G-13),(1) Carrying case, (1) Operating and maintenance inst., , Note: Pneumatic motor options add:, (1) 1/2″ hose w/ filter, oiler & 3/8″ coupler,, Battery motor options add:, (2) 5.2ah Li-Ion batteries, (1) Charger,
MANDREL KIT (0.5″/12.7MM) PART #: G-175, The G-175 mandrel kit is designed to fit in the Groundhog gear head and will allow it to fit in tube with a 0.5” (12.7mm) ID. This kit comes with a specific cutter head that will fit the smaller 0.5″ (12.7mm) shaft along with the draw rod assembly and G-01A ribs. Clamping range on this mandrel kit is from .5″ (12.7mm) I.D. to .655″ (16.6mm)., Includes, (1) Mandrel 0.5″ (12.7mm), (1) Actuator 0.5″ (12.7mm) and draw rod assembly, (1) Draw rod stop collar, (1) Clamp Rib set G-01A, (1) Cutterhead 1.5″ (38.1mm) for 0.5″ (12.7mm) mandrel
AIR CLAMP PART #: G-270, Air Clamp for the Ground rigidly clamps the tool to the pipe using an air clamp to pull the draw rod instead of the manual clamp wrench. With the flip of a switch, the tool can be clamped or released for high production and reduced cycle times. This accessory is only available with the pneumatic motor., Includes, (1) Air Actuator Clamp System Complete,
RIGHT ANGLE DRIVE PART #: G-290, When space is not a luxury, the Groundhog can be fitted with the Right Angle Drive so that the motors can be mounted to either side, or up/down. Kike all of our tools, the Right Angle Drive, is constructed out of precision machined components and is easy to assemble with all three motor options., Includes,(1) Right Angle Drive Complete, (4) Mounting Screws
MEMBRANE REMOVAL PART #: DEPENDENT ON SIZE (SEE SIZE CHART), Cutting head designed to remove the membrane between tubes on a boiler panel. Membrane heads use MRB-8 Inserts, an 8mm carbide bit, to remove material (same insert for Overlay heads). A specific base cutter head is required for mounting., Includes, (1) Membrane Head (specify size), (3) Mounting Screws, DOES NOT INCLUDE, Base Head, Inserts, Tube Size Membrane Head Base Head # of Inserts.875″ 22.2mm MO-100 GB-103 31.0″ 25.4mm MO-101 GB-104 41.125″ 28.6mm MO-102 GB-106 41.187″ 30.2mm MO-103 GB-106 41.25″ 31.8mm MO-104 GB-106 4
OVERLAY REMOVAL PART #: DEPENDENT ON SIZE (SEE SIZE CHART), Cutting head designed to remove the membrane and overlay on a boiler panel that has been coated with overlay material. Uses the same 8mm insert as the membrane heads to remove material. A specific base head is required for mounting. Slightly smaller circumference compared to the membrane heads, forces the head under hard material., Includes, (1) Overlay Head (specify size), (3) Mounting Screws, DOES NOT INCLUDE, Base Head, Inserts
Basic
Basic, GROUND MILLHOG BASIC KIT #: G-200, (1) Motor and gear drive assembly (specify motor), (1) Feed mechanism, (1) Mandrel 0.625″ (15.9mm), (1) Draw Rod Assembly, (1) Cutterhead (see cutterhead chart for options), (1) Clamp rib set choice of (G-02A – G-13) (specify), (1) Carrying case, (1) Operating and maintenance inst., Note:, Pneumatic motor options add:, (1) 1/2″ hose w/ filter, oiler & 3/8″ coupler, Battery motor options add:, (2) 5.2ah Li-Ion batteries, (1) Charger
Complete
Complete, GROUND MILLHOG COMPLETE KIT #: G-300, (1) Motor and gear drive assembly (specify motor), (1) Feed mechanism, (1) Mandrel 0.625” (15.9mm), (1) Draw Rod Assembly, (1) Cutterhead 1.5″ (38.1 mm), (1) Cutterhead 2.25″ (57.2 mm), (12) Clamp rib set (G-02A – G-13), (1) Carrying case, (1) Operating and maintenance inst., Note:, Pneumatic motor options add:, (1) 1/2″ hose w/ filter, oiler & 3/8″ coupler, , Battery motor options add:, (2) 5.2ah Li-Ion batteries, (1) Charger
Rental
Rental tool kits are setup and packaged to meet your specific job/application., This makes it so your tool is ready to go and only has parts necessary for your job, avoiding confusion and minimizing shipping costs.