One mandrel|Pneumatic & electric|Hydraulic
The Dictator MILLHOG pipe tool performs any degree of the bevel on pipe up to 18″ schedule 160 without cutting fluid while assuring maximum cutter blade life.
It has wide self-centering clamps that produce a superior clamping force for chatter-free bevels on all types of highly alloyed pipe.
Simple to operate and maintain, the Dictator features a choice of three motor options: pneumatic, electric, and hydraulic.
They can be easily switched with a simple hex wrench.
The tool’s robust spur gear drive train and dual opposed tapered roller bearing system are made of premium steel, heat treated, hardened and designed for trouble free service.
DICTATOR MILLHOG BASIC KIT #: D-200, (1) Motor and gear drive assembly (specify motor), (1) Feed mechanism, (1) Draw rod assembly, (2) Blade Block, (1) Carrying case, (1) Operating and maintenance inst., Note:, CLAMP RIBS AND PADS SOLD SEPARATELY (see clamp rib chart), Pneumatic motor options add:, (1) 3/4″ hose w/ filter, oiler & 1/2″ coupler, Electric motor options add:, (1) CD-GB Gear Box
DICTATOR MILLHOG COMPLETE KIT #: D-300, (1) Motor and gear drive assembly (specify motor), (1) Feed mechanism, (1) Draw rod assembly, (2) Blade Block, (7) Clamp rib sets D-02 – D-08, (1) Carrying case, (1) Operating and maintenance inst.,Note:, Pneumatic motor options add:, (1) 3/4″ hose w/ filter, oiler & 1/2″ coupler, Electric motor options add:, (1) CD-GB Gear Box
ADJUSTABLE TOOL POST PART #: D-57, The D-57 Adjustable Tool Post allows operators to fine tune their cutting blades to precisely the right position for the most accurate weld prep profiles when using the Commander, Dictator, and Dictator II MILLHOG machines. This kit features a carriage design as well as the ESCO wedge style blade lock system that has provided unparalleled rigidity in the beveling market for decades., Includes, (1) D-57 Adjustable Tool Post, (2) Blade locks, (2) Blade lock screws, (4) Mounting screws, (1) 3/16 short arm allen wrench,
BLADE BLOCK PART #: D-52, The Dictator MILLHOG cutterhead has 3 positions to mount blade blocks so that multiple angles of bevel can be performed at once. Both the basic and complete kits come with 2 blade blocks, but additional blade blocks can be purchased separately., Includes, (1) Tool post, (6) Blade locks, (6) Blade lock screws, (4) Mountin, screws ,
SAFETY SPRING HANGER PART #: CD-SH, The Commander/Dictator Safety Spring Hanger is designed to safely support the weight of the tool, while allowing for slight up and down movement to make mounting easier. The safety chain prevents the possibility of over extending the spring and provides a fail safe catch should the springs fail., Includes, (1) Spring hanger complete, (2) Shackle,
TORQUE MULTIPLIER GEAR BOX PART #: CD-GB, The Torque Multiplier Gear Box fits both the Commander and Dictator and is designed to be easily installed with all motor options. When the Gear Box is attached, the cutterhead rpm is cut in half while torque is doubled, making it ideal for larger pipe or pipe with heavy wall thickness., Includes, (1) Gear box assembly complete, (4) Mounting screws, (2) Motor keys,
RIGHT ANGLE DRIVE PART #: CD-RA, The Right Angle Drive easily attaches to the Commander or Dictator housing so that the motor can be mounted to the side of the tool, rather than straight. This allows for adaptation when there are space restrictions on a job site, but does not compromise the function of the tool., Includes, (1) Right angle drive assembly, (4) Mounting screws, (2) Motor keys,
Imperial, Working Range 4.5″ I.D. – 18.0″ O.D. Blade Series M-Series Blades Min. Width 14.75″ Head Length 28.0″ Pneumatic Electric Hydraulic 3.0 hp 1800 W 5 hp 90 psi 120 V 1500 psi 95 cfm 50/60 Hz 5 – 10 gpmCutterhead Speed 15 rpm Gear Box Included 1-14 rpmCutterhead Speed (gear box) 7.5 rpm 6.5 – 22.5 rpm 1 – 7 rpmWorking Weight 140 lbs 143 lbs 144 lbsShipping Weight 290 lbs 293 lbs 294 lbsShipping Dimensions 38″ x 20″ x 20″ 38″ x 20″ x 20″ 38″ x 20″ x 20″
Metric, Working Range 114.3mm I.D. – 457.2mm O.D. Blade Series M-Series Blades Min. Width 374.7mm Length 711.2mm Pneumatic Electric Hydraulic 2237 W 1800 W 3729 W 6.2 bar 220 – 240 V 103.4 bar 2690 Lt/min 50/60 Hz 30.5 – 45.4 Lt/min HzCutterhead Speed 15 rpm Gear Box Included 1 – 22 rpmCutterhead Speed (gear box) 7.5 rpm 6.5 – 22.5 rpm 1 – 11 rpmWorking Weight 63.5 kgs 64.9 kgs 65.3 kgsShipping Weight 131.6 kgs 133 kgs 133.4 kgsShipping Dimensions 965mm x 508mm x 508mm 965mm x 508mm x 508mm 965mm x 508mm x 508mm