Included Accessories

• WART MILLHOG STANDARD KIT #: H-200 (1) Motor and gear drive assembly (specify motor) (1) Feed mechanism (1) Mandrel 1.25″ (31.8mm) (1) Draw Rod Assembly (1) Cutterhead (see cutterhead chart for options) (2) Clamp rib set choice of H-01 – H-05 H-08 (specify) (1) Carrying case (1) Operating and maintenance inst., Note:, Pneumatic motor options add:, (1) 1/2″ hose w/ filter, oiler & 3/8″ coupler,

• WART MILLHOG DELUXE KIT #: H-300, (1) Motor and gear drive assembly (specify motor), (1) Feed mechanism, (1) Mandrel 1.25″ (31.8mm), (1) Draw Rod Assembly, (2) Cutterhead (see cutterhead chart for options), (6) Clamp rib sets (H-01 – H-05, H-08), (1) Carrying case, (1) Operating and maintenance inst., Note:, Pneumatic motor options add:, (1) 1/2″ hose w/ filter, oiler & 3/8″ coupler

Optional Accessories

• MandrelKit 1", The H-221 mandrel kit is designed to fit both the Wart MILLHOG and Tube Weasel MILLHOG gear head and will allow it to fit in tube with a 1.0” (25.4mm) I.D. The advantage of this mandrel kit is that it uses the same cutterhead and wrench assembly that comes standard on the Tube Weasel and Wart, but allows for slightly smaller I.D. compared to standard. Clamping range with this mandrel kit is 1.0″ (25.4mm) I.D. to 1.3″ (33mm) I.D., Includes, (1) Mandrel 1.0″ (25.4mm), (1) Actuator 1.0″ (25.4mm) and draw rod assembly, (1) Draw rod stop collar, (1) Clamp rib set H-0,

• MANDREL KIT (0.75″/19.1MM) PART #: H-240, The H-240 mandrel kit is designed to fit in the Wart MILLHOG gear head and will allow it to fit in tube with a 0.75” (19.1mm) I.D. This kit comes with a specific cutter head that will fit the smaller 0.75” (19.1mm) shaft along with the draw rod assembly. The clamping range of this mandrel kit is 0.75″ (19.1mm) I.D. to 1.28″ (32.5mm) I.D., Includes, (1) Mandrel 0.75″ (19.1mm), (1) Actuator 0.75″ (19.1mm) and draw rod assembly, (1) Draw rod stop collar, (1) Wrench, (4) Clamp Rib sets (G-03A – G-06), (1) Cutterhead 2.625″ (66.7mm) for 0.75″ (19.1mm) mandrel,

• Z-Wart Configuration Part #: Consult Factory, The Z-Wart MILLHOG incorporates a right angle drive that lowers the rpm by half and doubles the torque at the cutter blade. This makes it well suited for applications that include tube stub removal. Please consult factory for application specifications and ordering information., Includes, (1) Z-Wart assembly complete,

• Membrane Removal, Membrane Removal Part #: Dependent On Size (See Chart), Cutting head designed to remove the membrane between tubes on a boiler panel. Membrane heads use MRB-8 Inserts, an 8mm carbide bit, to remove material (same insert for Overlay heads). A specific base cutter head is required for mounting., Includes, (1) Membrane Head (specify size), (4) Mounting Screws, DOES NOT INCLUDE, Base Head, Inserts,Tube Size Membrane Head Base Head # of Inserts2.0″ 50.8mm MO-110 HB-110 62.125″ 54.0mm MO-111 HB-110 62.25″ 57.2mm MO-112 HB-110 62.5″ 63.5mm MO-113 HB-110 72.75″ 69.9mm MO-114 HB-114 73″ 76.2mm MO-115 HB-114 8

• Overlay, Overlay Removal Part #: Dependent On Size (See Chart), Cutting head designed to remove the membrane and overlay on a boiler panel that has been coated with overlay material. Uses the same 8mm insert as the membrane heads to remove material. A specific base head is required for mounting. Slightly smaller circumference compared to the membrane heads, forces the head under hard material., Includes, (1) Overlay Head (specify size), (4) Mounting Screws, Tube Size Membrane Head Base Head # of Inserts2.0″ 50.8mm MO-210 HB-110 62.125″ 54.0mm MO-211 HB-110 62.25″ 57.2mm MO-212 HB-110 62.5″ 63.5mm MO-213 HB-110 72.75″ 69.9mm MO-214 HB-114 73″ 76.2mm MO-215 HB-114 8DOES NOT INCLUDEBase HeadInsert

Imperial

Imperial,Working Range 0.75″ I.D. – 4.5″ O.D. Blade Series M-Series Blades Min. Width 2.625″ Length 15.25″ Pneumatic Electric 1.25 hp 950 W 90 psi 120 V 40 cfm 50/60 HzCutterhead Speed 114 rpm 14-58 rpmWorking Weight 21.5 lbs 22.6 lbsShipping Weight 55 lbs 60 lbsShipping Dimensions 24″ x 20″ x 6″ 24″ x 20″ x 7″

Metric

Metric, Working Range 19.1mm I.D. – 114.3mm O.D. Blade Series M-Series Blades Min. Width 66.7mm Length 387.4mm Pneumatic Electric 932 W 900 W 6.2 bar 120 V 1133 Lt/min 50/60 HzCutterhead Speed 98 rpm 87 rpmWorking Weight 9.8 kgs 10.3 kgsShipping Weight 24.9 kgs 27.2 kgsShipping Dimensions 610mm x 508mm x 152mm 610mm x 508mm x 178mm