Hand held|Larger flanges|Recondition RF / FF
The MiniFacer product range are powerful manual operated flange facers for machining even the hardest to reach flanges in just minutes.
The MiniFacer eliminates the need for heavy equipment compressors and other power sources.
These easy to operate and compact handheld flange facers allow any technician to recondition RF/FF and other gasket seatings in situ according to ASME B16.5 standard.
Setup in minutes, machining in seconds by a single person with a seamless result every time.
In addition, the manual and cold machining features eliminate the need for countless permits.
Internal Clamp Capacity Collet, Ø 48mm, Ø 2” , Ø 240mm, Ø 9”, Internal Clamp Capacity Base, Ø 146mm, Ø 6”, Ø 466mm, Ø 18” Facing Diameter, Ø 48mm, Ø 2”, Ø 560mm, Ø 22”
Stock finish = ASME B 16.5 6.3 to 12.5μm according to ASME specification, Smooth finish = 3.2 to 6.3 μm and can be used for other types of gaskets, Smooth finish gear = 3.2 to 6.3 μm and can be used for other types of gaskets
1. Body,2. Complete set of clamping gibs,3. Plastic hammer,4. Collet,5. Toolholder assy,6. Tool Straight,7. Tool 90° (RH),8. Tool 90° (LH),9. Cutting tips,10. Allen Keys 2mm & 3mm,11. Allen Keys 5mm & 8mm,12. Ring Spanner 19mm,13. Ring Spanner 10mm,14. Base,15. Complete set of clamping feet,16. Feet extensions,17. Adjustable feet,18. Setting bar,19. Counterweight,20. Counterweight rail,21. Slide chart,22. Feeler gauge,23. MKM (Dial gauge)