Mactech’s Mini
Flange Facing Machine
I/D Mounted Flange Facer

 

Mini-Flange-Facing-Machine

1.25 inches to 6.42 inches ID

2 inches to 15 inches Flange Facing Capacity

Mactech’s Mini Flange Facing Machine PDF
Contact Us Here For More Information!

Mactech’s compact and reliable Mini Flange Facer is an easy to use portable flange facer for resurfacing pipe and tube flanges, with no special training required.

The Mini Flange Facer rigidly mounts to the inside diameter of the pipe for stable and accurate machining.

The self-centring draw rod makes installation quick and easy.

This amazingly powerful and versatile tool cuts through the toughest material and works on a wide range of face diameters.

Cutter blades machine smoothly, without requiring cutting fluids.

The Mini Flange Facer produces a clean, continuous chip, and squares off the end of the pipe.

Each MT Mini Flange Facer is packed in protective foam and comes complete with the following:

• In-line air drive

• Tool Block and Slide

• All hand tools required

• Air Caddy (filter and lubricator)

• Gang box for machine storage

• Operating manual with parts list

A trained operator can set up the MT Mini Flange Facer on unobstructed pipe end or flange in 15 minutes or less.

Operational Benefits

  • 2 to 15 inch diameter flange facing capability.
  • 1.25 to 6.42 inch inside diameter mounting range.
  • Quick and easy setup.
  • Torque and chatter free operation.
  • Lightweight.
  • Self-centring draw rod assembly.
  • No special training required.

Mactech’s Mini Flange Facing Machine

Pipe Mounting Diameter:

Nominal pipe inside diameter mounting range: 1.25” – 10” (31.8mm – 254mm)

For pipe I.D. ranges of 1.25” – 1.925” (31.8mm – 48.9mm) an extended range mandrel assembly is provided with the machine.

Flange Facing Diameter:

2” – 15” diameter (50.8mm – 381mm diameter)

A tool holder extension is provided with the machine to extend cutting range.

Weight of turntable (case 1) 2,800lbs (681kg)

Weight of base (case 2) 1,361lbs (526kg)

Total shipping weight 4,180lbs (1,445kg)

Case dimensions (1) 96” x 24” x 51” 2,438 x 610 x 1,295mm

Case dimensions (2) 51” x 13” x 51” 1,295 x 330 x 1,295mm

Motor: 1-1/4 HP (.9325 kw)

Air Pressure: 90 psi (6.2 bar)

Air Volume: 40 cfm (1,133 lpm)

Speed: 34 rpm

The radial feed system uses a 6-point star wheel which indexes the tool bit .007” (0.2mm) per tripper block or.014” (0.4mm) each revolution.

Mactech’s Mini Flange Facing Machine PDF
Contact Us Here For More Information!

Need Something Bigger – Click on the on Flange Facing Machines Below!

Silk AXL012 Flange Facing Machine

Silk AXL012
Flange Facing Machine
O/D Mounted

Maximum Clamping Capacity

12 inches | 305mm

Silk-AX024-Flange-Facing-Machine

Silk AX024
Flange Facing Machine
O/D Mounted

Maximum Clamping Capacity

23 inches | 584mm

Esco Ground Millhog Series

Silk AX321
Flange Facing Machines
I/D Mounted

3 inches ID to 21 inches OD

75 mm ID to 533 mm OD