Sigma MiniFacer EVO Manual Flange Facing 

MiniFacer Evoe Sygma
  Min Max
Internal Clamp Capacity Collet Ø 48mm
Ø 2”
Ø 240mm
Ø 9”
     
Internal Clamp Capacity Base Ø 146mm
Ø 6”
Ø 466mm
Ø 18”
     
Facing Diameter Ø 48mm
Ø 2”
Ø 560mm
Ø 22”
Contact Us Here For More Information!

The Sygma™ MiniFacer EVO is the Big Brother of the MiniFacer ONE.

The Tool is perfect for the larger flanges. Equipped with an adjustable base for increased precision.

This easy to operate hand held flange facer allows any technician to recondition RF / FF and other gasket seatings in situ.

After mounting of the tool the alignment can be adjusted in no-time!

The internal diameter that can be clamped is 2” to 22”

Due to the huge clamping and machining range, the MiniFacer EVO is a very efficient tool for a service or repair workshop but also for piping construction companies or vessel manufacturers.

The tool is delivered in a highly durable hard case which is easy to manipulate or transport and guarantees safe transportation of the tool to wherever needed.

The tool is delivered in a highly durable hard case which is easy to manipulate and guarantees safe transportation of the tool to wherever needed. The case contains all parts listed in the Case Content section below.

Case Dimensions 67 x 52 x 39 cm
Total Case Weight 34kg
MiniFacer Weight (ready to use) 9kg
Overall Length Machine 425mm / 17”
Height from Flange Face 200mm / 8”
Min. Swing Diameter Ø 590mm / 23”

Operational Benefits

  • The MiniFacer Product range are powerful manual operated flange facers for machining even the hardest to reach flanges.
  • Setup in minutes, machining in seconds by a single person with a seamless result every time!
  • The clamping and machining range allow the MiniFacer models to accommodate a wide range of flanges types and ranges in various industries.
  • The MiniFacer EVO can switch from a clamping base to a levelling base in no time to obtain even
    higher precision operations.
  • The tool provides a gramophone finish to create optimum gasket contact and seating conditions.
  • Due to the integrated feed spindle, which is controlling the cutting tool feed , whilst turning the machine, the required surface finish is obtained.
  • The Sygma™ Minifacer Evo is designed with a revolutionary and well thought-out gear box to deliver both a smooth and stock finish result with just a simple gear switch.

Images

Demonstration Video

Demonstration Set Up Video

Collet Demonstration Set Up

Sigma MiniFacer EVO Manual Flange Facing Tool

  Min Max
Internal Clamp Capacity Collet Ø 48mm
Ø 2”
Ø 240mm
Ø 9”
     
Internal Clamp Capacity Base Ø 146mm
Ø 6”
Ø 466mm
Ø 18”
     
Facing Diameter Ø 48mm
Ø 2”
Ø 560mm
Ø 22”

The Sygma™ Minifacer Evo is designed with a revolutionary and well thought-out gearbox to deliver both a smooth and stock finish result with just a simple gear switch.

Stock finish = ASME B 16.5 6.3 to 12.5μm according to ASME specification

Smooth finish = 3.2 to 6.3 μm and can be used for other types of gaskets

Smooth finish gear = 3.2 to 6.3 μm and can be used for other types of gaskets

Minifacer EVO Sygma

Minifacer EVO Sygma

1. Body 13. Ring Spanner 10mm
2. Complete set of clamping gibs 14. Base
3. Plastic hammer 15. Complete set of clamping feet
4. Collet 16. Feet extensions
5. Toolholder assy 17. Adjustable feet
6. Tool Straight 18. Setting bar
7. Tool 90° (RH) 19. Counterweight
8. Tool 90° (LH) 20. Counterweight rail
9. Cutting tips 21. Slide chart
10. Allen Keys 2mm & 3mm 22. Feeler gauge
11. Allen Keys 5mm & 8mm 23. MKM (Dial gauge)
12. Ring Spanner 19mm  

Minifacer EVO Sygma

Minifacer EVO Sygma

Minifacer EVO Sygma

Minifacer EVO Sygma

Manual MiniFlange Facer EVO PDF

Need something smaller?

Check out those below!

Contact Us Here For More Information!
MiniFacer One Sygma

MiniFacer ONE

Internal Clamp Capacity
Ø25 mm/Ø1'' to 252 mm/10''

Facing Diameters
Ø30 mm/Ø1.25'' to 350 mm/14''
MiniFacer ONE SB Sygma

MiniFacer ONE SB

Internal Clamp Capacity
Ø13.5mm/Ø0.53'' to Ø30.5mm/1.18''

Facing Diameter Ø13.5mm/Ø0.53'' to Ø350mm/Ø14''

MiniFacer ONE

External Clamp Capacity
Ø65mm/Ø2.5'' to Ø350mm/Ø13.5″

Facing Diameter
Ø65mm/Ø2.5'' to Ø350mm/Ø13.5''