Esco-Commander-Millhog Pneumatic

Esco-Commander-Millhog Pneumatic

Esco-Commander-Millhog Electric

Esco-Commander-Millhog Electric

Esco-Wart-Millhog-Series-Hydraulic

Esco-Wart-Millhog-Series-Hydraulic

Esco Commander Millhog

Designed to bevel all schedules of pipe from 3.75″ (95.3mm) I.D. to 14.0″ (355.6mm) O.D., the Commander MILLHOG Model C-314 features a clamping system that spreads the contact points of the clamps radially inside the pipe.

This minimizes vibration for chatter-free end preps on both thin and heavy wall pipe.

To assure stable, smooth rotation of the cutterhead, this rugged tool employs dual opposed tapered roller bearings.

Powerful and versatile, torque at the cutter blade for the Commander is achieved with a choice of three motor options suited to fit your application.

Like all MILLHOG tools, the Commander MILLHOG is simple to operate and rugedly designed for years of trouble free service.

Esco Commander Millhog PDF
UK Only Instant Quote?
OR
Need more information?

Esco Commander Millhog Features

  • One mandrel and seven clamp ribs/pads cover the whole range of the tool
  • Wide clamps spread the contact  force for superior clamping
  • Three powerful motor options that are easily interchangeable
  • Dual opposed tapered roller bearing design provide years of trouble free service
  • Available off-set gear drive lowers rpm, doubles the torque and enables the cutter blade to pull a thick chip for fast pipe beveling and increased cutter blade life.
  • Available spring hanger ensures accurate alignment when clamping
  • Engineered for high performance and low maintenance
  • Fully portable for on-site use

Esco Commander Millhog Demonstration Video

Cromeum Carbide Lined Pipe, Cut & Bevel

Images

Available Kits

COMMANDER MILLHOG BASIC KIT #: C-200

(1) Motor and gear drive assembly (specify motor)
(1) Feed mechanism
(1) Draw rod assembly
(2) Blade Block
(1) Carrying case
(1) Operating and maintenance inst.

Note:

CLAMP RIBS AND PADS SOLD SEPARATELY (see clamp rib chart)

Pneumatic motor options add:
(1) 3/4″ hose w/ filter, oiler & 1/2″ coupler

Electric motor options add:
(1) CD-GB Gear Box

COMMANDER MILLHOG COMPLETE KIT #: C-300

(1) Motor and gear drive assembly (specify motor)
(1) Feed mechanism
(1) Draw rod assembly
(2) Blade Block
(7) Clamp rib sets C-01 -C-07
(1) Carrying case
(1) Operating and maintenance inst.

Note:

Pneumatic motor options add:
(1) 3/4″ hose w/ filter, oiler & 1/2″ coupler

Electric motor options add:
(1) CD-GB Gear Box

Rental tool kits are setup and packaged to meet your specific job/application.

This makes it so your tool is ready to go and only has parts necessary for your job, avoiding confusion and minimizing shipping costs.

Specifications

Working Range   3.75″ I.D. – 14.0″ O.D.  
Blade Series   M-Series Blades  
Min. Width   11.5″  
Head Length   26.0″  
  Pneumatic Electric Hydraulic
  3.0 hp 1800 W 5 hp
  90 psi 120 V 1500 psi
  95 cfm 50/60 Hz 5 – 10 gpm
Cutterhead Speed 24 rpm Gear Box Included 1-22 rpm
Cutterhead Speed (gear box) 12 rpm 6.5 – 22.5 rpm 1 – 11 rpm
Working Weight 89 lbs 91 lbs 93 lbs
Shipping Weight 200 lbs 202 lbs 204 lbs
Shipping Dimensions 32″ x 15″ x 17″ 32″ x 15″ x 17″ 32″ x 15″ x 17″
Working Range   95.3mm I.D. – 355.6mm O.D.  
Blade Series   M-Series Blades  
Min. Width   323.9mm  
Length   660.4mm  
  Pneumatic Electric Hydraulic
  2237 W 1800 W 3729 W
  6.2 bar 220 – 240 V 103.4 bar
  2690 Lt/min 50/60 Hz 30.5 – 45.4 Lt/min Hz
Cutterhead Speed 24 rpm Gear Box Included 1 – 22 rpm
Cutterhead Speed (gear box) 12 rpm 6.5 – 22.5 rpm 1 – 11 rpm
Working Weight 40.4 kgs 41.3 kgs 42.2 kgs
Shipping Weight 90.7 kgs 91.6 kgs 92.5 kgs
Shipping Dimensions 813mm x 381mm x 432mm 813mm x 381mm x 432mm 813mm x 381mm x 432mm

Accessories

ADJUSTABLE TOOL POST PART #: D-57

The D-57 Adjustable Tool Post allows operators to fine tune their cutting blades to precisely the right position for the most accurate weld prep profiles when using the Commander, Dictator, and Dictator II MILLHOG machines. This kit features a carriage design as well as the ESCO wedge style blade lock system that has provided unparalleled rigidity in the beveling market for decades.

Includes

(1) D-57 Adjustable Tool Post
(2) Blade locks
(2) Blade lock screws
(4) Mounting screws
(1) 3/16 short arm allen wrench

BLADE BLOCK PART #: C-52
The Commander MILLHOG cutterhead has 3 positions to mount blade blocks so that multiple angles of bevel can be performed at once. Both the basic and complete kits come with 2 blade blocks, but additional blade blocks can be purchased separately.

Includes
(1) Tool post
(5) Blade locks
(5) Blade lock screws
(4) Mounting screws

SAFETY SPRING HANGER PART #: CD-SH

The Commander/Dictator Safety Spring Hanger is designed to safely support the weight of the tool, while allowing for slight up and down movement to make mounting easier. The safety chain prevents the possibility of over extending the spring and provides a fail safe catch should the springs fail.

Includes
(1) Spring hanger complete
(2) Shackle

TORQUE MULTIPLIER GEAR BOX PART #: CD-GB

The Torque Multiplier Gear Box fits both the Commander and Dictator and is designed to be easily installed with all motor options. When the Gear Box is attached, the cutterhead rpm is cut in half while torque is doubled, making it ideal for larger pipe or pipe with heavy wall thickness.

Includes

(1) Gear box assembly complete
(4) Mounting screws
(2) Motor keys

RIGHT ANGLE DRIVE PART #: CD-RA

The Right Angle Drive easily attaches to the Commander or Dictator housing so that the motor can be mounted to the side of the tool, rather than straight. This allows for adaptation when there are space restrictions on a job site, but does not compromise the function of the tool.

Includes

(1) Right angle drive assembly
(4) Mounting screws
(2) Motor keys

Resources

Mandrel Clamp Rib Set I.D. Range (in) I.D. Range (mm)
  C-01 3.75 – 4.5 95.3 – 114.3
  C-02 4.375 – 5.25 111.1 – 133.4
  C-03 5.125 – 6.0 130.2 – 152.4
  C-04 5.875 – 6.8 149.2 – 172.7
  C-01 & C-05 6.75 – 7.562 171.5 – 192.1
  C-02 & C-05 7.437 – 8.25 188.9 – 209.6
Standard 3.0″ (76.2mm) C-03 & C-05 8.125 – 8.938 206.4 – 227.0
  C-04 & C-05 8.875 – 9.7 225.4 – 246.4
  C-01 & C-06 9.687 – 10.5 246.1 – 266.7
  C-02 & C-06 10.375 – 11.125 263.5 – 282.6
  C-03 & C-06 11.0 – 11.812 279.4 – 300.0
  C-04 & C-06 11.75 – 12.5 298.5 – 317.5
  C-03 & C-07 12.4 – 13.25 315.0 – 336.6
  C-04 & C-07 13.125 – 14.0 333.4 – 355.6
PDF Brochure
M-Series Blades

Esco Tube & Pipe Beveling Tools

UK Only Instant Quote?
OR
Need more information?
Esco Ground Millhog Series

Ground Millhog Series

0.5″ ID. – 2.25″ OD. 12.7MM ID. – 57.2MM OD.
Esco Ground Millhog Series

Mongoose Millhog Series

0.625″ I.D. – 3.0″ O.D. 15.9MM I.D. – 76.2MM O.D.
Tube Weasel Millhog Series

Tube Weasel Millhog Series

0.75″ ID. – 3.0″ OD. 19.1MM ID. – 76.2MM OD.
C-Hog Millhog Series

C-Hog Millhog Series

0.5″ OD. – 3.0″ OD. 12.7MM OD. – 76.2MM OD.
Wart Millhog Series

Wart Millhog
Series

0.75″ ID. – 4.5″ OD. 19.1MM ID.–114.3MM OD.
Fin-Millhog-Series

Fin Millhog
Series

1.25″ ID. – 2.5″ OD. 31.8MM ID. – 63.5MM OD.
Mini-Millhog-Series

Mini Millhog
Series

1.25″ I.D. – 6.625″ O.D. 31.8MM ID–168.3MM OD
Prepzilla-Millhog-Series

Prepzilla Millhog Series

1.575″ I.D. – 8.625″ O.D. 40.0MM ID– 219.1MM OD
Dictator Millhog Series

Dictator Millhog Series

4.5″ I.D. – 18.0″ O.D. 114.3MM ID–457.2MM OD
Dictator 11 Millhog Series

Dictator II Millhog Series

4.5″ I.D. – 24.0″ O.D. 114.3MM ID–609.6MM OD
Terminator Millhog Series

Terminator Millhog Series

8.75″ I.D. – 36.0″ O.D. 222.3MM ID–914.4MM OD