Ergonomic work|Flexible production|Higher performance.
Ergonomic work, flexible production.
Perfect bevel for all common chamfer angles, the plate and tube beveling machine CHP 12 G is the adjustable version of the CHP 12. Fully equipped, this machine is designed for bevelling plates and tubes at any angle between 20 to 45°with optimum plate/machine working position.
The trolley improves machine stability and cutter life and makes this machine easy to use for large plate chamfering / weld seams preparation.
This machine is crucial for overall higher production performance. Faster and more stable, with no dust or noise, this fast self-feed bevelling system reduces wasted time and costs more than 80% throughout the entire sheet metal welding preparation process.
Furthermore, no supervisory control is needed from workers during bevelling process.
3 cutters for mild steel (1 on machine)
1 set of spanners
Cutters for mild steel
Cutters for stainless steel
Cutters for aluminum
Plastic rollers to avoid material marking
Performances, Speed: 2.6 m/min, Maximum bevel in one run: 12 mm*, Maximum bevel recommended in several runs: 17 mm*, Maximum recommended thickness: plates and tubes up to 20 mm, Nominal thickness: plates and tubes from 6 mm to 30 mm, Plate beveling: width min. 55 mm (for smaller width, please consult), Tube bevelling: Ø min. int.100 mm, Disc bevelling: Ø min. 350 mm, * Dimensions calculated on 400 Mpa steel, bevel length, Bevel blueprint, Plate bevelling: K, V, X and Y bevels, Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube (depending on diameters)., Bevel speed: 2.6 m/ min. ,