Increased capacity|Stops turning|Lower bevels
Features increased capacity production, stops turning plates.
Eliminate risks and save production time, this beveler CHP 21 G INV is designed to make lower bevels for big and heavy plates without turning them over.
This bevelling machine offers the same features and benefits as its counterpart the CHP 21 G beveler.
The CHP 21 G INV is compatible with the CHP 21 G working in parallel achieves exceptional productivity rate with just one operator.
3 cutters for steel (1 on machine)
1 set of spanners for the machine adjustment
Plastic rollers to avoid material marking
Performances, Maximum bevel in one run: 2, Maximum bevel recommended in several runs: 28 mm*, Maximum recommended thickness: plates and tubes up to 40 mm, Nominal thickness: plates and tubes from 9 mm to 50 mm, Angle variation: from 20° to 45°, Plate beveling: width min. 70 mm, Tube bevelling: Ø min. int.100 mm, Disc bevelling: Ø min. 350 mm, * Dimensions calculated on 400 Mpa steel, bevel length, , Bevel blueprint, Plate bevelling: K, V, X and Y bevels, Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube (depending on diameters)., Bevel speed: 1.7 m/ min.
Specifications, Motor: three-phase, Motor power: 4 CV – 3 kW, Voltage:, 220/380 V. 50 Hz., 250/440 V. 60 Hz., For other voltages, please consult us, Electric box with:, Thermomagnetic switch trip, Emergency stop button, Switcher, Weight, Net weight: 450 Kg, Works height: adjustable from 850 mm to 880 mm, Built-in trolley