CHP 12INV

Standard Bevelling Machines

Product ID #

CHP12INV

Profitability & Productivity|Upside-down bevels|Large diameter

Highest Profitability & Productivity, More flexible and more productive than ever! The CHP 12 INV can bevel in an upside-down position effortlessly in a complete self-feed mode.

As its emblematic model the CHP 12, the beveller CHP 12 INV is the perfect solution to bevel large diameter tubes as well as tank heads, thanks to its breathing valves.

Its bevelling speed makes this machine the most high performance and flexible bevelling system of all the CHP 12 range for large plates and diameter tube bevelling, simplifying production processes as much as possible and reducing production time.

Product Specifications

Flexible: breathing valve to change position easily
High profitability: high speed self-feed bevel -2,6 m/min
Constant and uniform bevel depth + high bevel capacity up to 17 mm bevel
Dry cut: no need to prepare plates and tubes to bevel.

Included Accessories

3 cutters for mild steel (1 on machine)
1 angle variation device – 30°
1 device to bevel tubes
1 set of spanners

Optional Accessories

Cutters for mild steel
Cutters for stainless steel
Cutters for aluminum
Angle variation devices: 22.5 – 25º – 30º – 35º – 37.5º – 45º (For others angle, please enquire)
Plastic rollers to avoid material marking
Spare part for small width plates: min. plates width 20 – 25 – 32 and 40 mm

CEVISA Catalogue

Additional Information

Technical Details

Performances, Maximum bevel in one run: 6 mm*, Maximum bevel recommended in several runs: 10mm*, Maximum recommended thickness: plates and tubes up to 8 mm., Nominal thickness : plates and tubes from 3 mm to 16 mm., Double bevel with 2 machines working in parallel: CHP 12 + CHP12 INV., Plate bevelling: width min. 55 mm (for smaller width, please consult)., Tube bevelling: Ø min. int.100 mm., Disc bevelling: Ø min. 350 mm., * Dimensions calculated on 400 Mpa steel, bevel length., Bevel blueprint, Plate bevelling: K, V, X and Y bevels, Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube(depending on diameters)., Bevel speed: 1.6 m/ min.

Specifications

Specifications, Motor: three-phase, Motor power 0.75 CV – 0.55 kW, Voltage: 220/380 V. 50 Hz, 250/440 V. 60 Hz, For other voltages, please consult us., Electric box with, Thermomagnetic switch trip, Emergency stop button, Weights, Net weight: 45 Kg, Works height: adjustable, Switch, Reversing switch / Switcher

CHP 12INV

Standard Bevelling Machines