Included Accessories

• 3 cutters for mild steel (1 on machine)

• 1 angle variation device – 30°

• 1 device to bevel tubes

• 1 set of spanners

Optional Accessories

• Cutters for mild steel

• Cutters for stainless steel

• Cutters for aluminum

• Angle variation devices: 22.5 – 25º – 30º – 35º – 37.5º – 45º (For others angle, please enquire)

• Plastic rollers to avoid material marking

• Spare part for small width plates: min. plates width 20 – 25 – 32 and 40 mm

Technical Details

Performances, Maximum bevel in one run: 6 mm*, Maximum bevel recommended in several runs: 10mm*, Maximum recommended thickness: plates and tubes up to 8 mm., Nominal thickness : plates and tubes from 3 mm to 16 mm., Double bevel with 2 machines working in parallel: CHP 12 + CHP12 INV., Plate bevelling: width min. 55 mm (for smaller width, please consult)., Tube bevelling: Ø min. int.100 mm., Disc bevelling: Ø min. 350 mm., * Dimensions calculated on 400 Mpa steel, bevel length., Bevel blueprint, Plate bevelling: K, V, X and Y bevels, Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube(depending on diameters)., Bevel speed: 1.6 m/ min.

Specifications

Specifications, Motor: three-phase, Motor power: 0.75 CV – 0.55 kW, Voltage, 220/380 V. 50 Hz, 250/440 V. 60 Hz, For other voltages, please consult us., Electric box with, Thermomagnetic switch trip, Emergency stop button, Weights, Net weight: 45 Kg, Works height: adjustable, Switch, Reversing switch / Switcher